Перейти к основному содержанию

Возврат к шагу #9

Редактировать с помощью Nate Pritzker -

Правка отклонена автор Adam O'Camb

До
После
Без изменений

Шаг Линий

-[* red] We lifted up the cover of the optical drive by removing the six Phillips #00 screws. These are all labeled on the previous image.
+[* red] We lifted up the cover of the optical drive by removing the six Phillips #0 screws. These are all labeled on the previous image.
[* icon_caution] Because of a secured wire leading to the drive, we reattached the cover to facilitate the remove of the entire drive assembly without harming any of the electronics.
[* black] There are a ton of parts in the optical drive, but there is nothing very fancy about this drive compared to other slot-loading drives, so I didn't take it apart completely. There are also a ton of gears and levers that I did not want to deal with.