Перейти к основному содержанию

Возврат к шагу #10

Редактировать с помощью Sterling Hirsh -

На одобрении

До
После
Без изменений

Шаг Линий

-[* black] The screws holding in the drive were deep within the casing.
+[* red] The screws holding in the drive were deep within the casing.
[* black] Once those screws were removed, the entire case could be lifted off.
-[* red] This wire slid out from its horizontal slot. Once it was detached, the flat band came out as well.
+[* icon_caution] Don't pull too hard! There are two cables attaching the drive to the logic board underneath.
+[* black] This wire slid out from its horizontal slot. Once it was detached, the ribbon cable came out as well.