Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Walter Galan -

На одобрении

До
После
Без изменений

Шаг Линий

[* red] Remove the two T6 Torx screws from each side of the hard drive (four screws total).
-[* black] Install these four screws on your new hard drive.
+[* icon_note] You'll need to transfer these screws to your new hard drive if you're changing drives.
[* black] Transfer the pull tab to your new hard drive by simply peeling it off the old drive and sticking it to the new one.