Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Andrew Bookholt -

На одобрении

До
После
Без изменений

Шаг Линий

[* red] Remove the two T6 Torx screws from each side of the hard drive (four screws total).
[* icon_note] You'll need to transfer these screws to your new hard drive if you're changing drives.
-[* black] Transfer the pull tab to your new hard drive by simply peeling it off the old drive and sticking it to the new one.
+[* icon_note] If you are installing a new hard drive, we have an [guide|751|OS X install guide] to get you up and running.