Перейти к основному содержанию

Изменения в этом шаге

Редактировать с помощью Brittany McCrigler -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Set the new hard drive into the open area where the plastic positioner was.
[* icon_note] Make sure that the connectors on the hard drive are facing down, as shown, otherwise you will not be able to install the drive.
+[* black] While firmly holding the enclosure in place with one hand, use your other hard to press the hard drive over the enclosure connectors.
+[* black] Once the hard drive is snug, reinsert the plastic positioner, while holding the hard drive against the bottom of the enclosure.