Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Andrew Bookholt -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Lift the heat sink up off the logic board.
[* icon_note] Be mindful of the microphone cable when lifting the heat sink, as it can get tangled on the top edge of the fan.
[* icon_note] Ificon_caution] When you havemount the A1304 version of MacBook Air,heat sink back onto the fan islogic board, be sure to apply a separate component from the heat sink. Lift the fan out fromnew layer of thermal paste. We have a [guide|744|guide] that makes replacing the machine at this point. 5,0 Screwthermal paste easy.
[* icon_note] Ificon_caution] When you havemount the A1304 version of MacBook Air,heat sink back onto the fan islogic board, be sure to apply a separate component from the heat sink. Lift the fan out fromnew layer of thermal paste. We have a [guide|744|guide] that makes replacing the machine at this point. 5,0 Screwthermal paste easy.

Изображение 1

Нет предыдущего изображения

Добавлено