Перейти к основному содержанию

Изменения к шагу №1

Отредактированно Adam O'Camb -

Правка одобрена автор Adam O'Camb

Удален
Добавлено
Без изменений

Шаг Линий

[* red] Locate the three 9.7mm Phillips head screws inside the zipper compartment and unscrew them.
[* black] Once you removeLift the first 3 screws there are no more screws onzipper panel out of the other side. There are just clamps that are holding the otherspeaker.
[* icon_note] The
side of the panel opposite the screws is held in placeplace by small clamps. The zipper panel should easily lift free from the device. However, sometimes it needs a littledevice, but may require gentle prying. With a little pressure, it will pop out (this was the most dificult part for me).
[* black] Once you removeLift the first 3 screws there are no more screws onzipper panel out of the other side. There are just clamps that are holding the otherspeaker.
[* icon_note] The
side of the panel opposite the screws is held in placeplace by small clamps. The zipper panel should easily lift free from the device. However, sometimes it needs a littledevice, but may require gentle prying. With a little pressure, it will pop out (this was the most dificult part for me).