Перейти к основному содержанию

Возврат к шагу #7

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* black] Remove the following screws from the headphone jack assembly:
[* red] Five 2.6 mm Phillips #0
[* orange] Two 2.2 mm Wide Head Phillips #00
[* yellow] Two 2.6 mm Phillips #00
-[* icon_note] These screws are angled into the aluminum frame. Be sure to hold the screwdriver so that the screwdriver is in line with the screw, to avoid stripping the screw.
+ [* icon_note] These screws are angled into the aluminum frame. Be sure to hold the screwdriver so that the screwdriver is in line with the screw, to avoid stripping the screw.