Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью Walter Galan -

На одобрении

До
После
Без изменений

Шаг Линий

[* red] Remove the two 6 mm T10 Torx screws from the hard drive and remove the hard drive bracket.
[* icon_noteicon_reminder] The hard drive bracket with the thermal sensor board is attached to the SATA connector side of the hard drive.
[* icon_note] If you are installing a new hard drive, we have an [guide|751|OS X install guide] to get you up and running.
[* icon_noteicon_reminder] The hard drive bracket with the thermal sensor board is attached to the SATA connector side of the hard drive.
[* icon_note] If you are installing a new hard drive, we have an [guide|751|OS X install guide] to get you up and running.