Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #7

Редактировать с помощью Dominik Schnabelrauch -

Правка одобрена автор Dominik Schnabelrauch

До
После
Без изменений

Шаг Линий

[* black] Use a Spudger to slightly lift up the motherboard.
[* icon_caution] Be careful! You need to thread the display flex cable through a gap in the motherboard while lifting it up. It is also connected to the vibration motor, which still sticks to the phone.
[* icon_caution] Take especially care of the two black connectors on the side of the battery. They break off easily during the removal of the motherboard.
[* black] Use a tweezer to take out the vibration motor and then remove the motherboard completely.