Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Dennis -

Правка одобрена автор Dennis

До
После
Без изменений

Шаг Линий

[* black] Adjust the braking lever to around 45° and remove the bleeding screw.
[* black] Fill up the bleeding syringe to the half and install it to the braking lever. ***Remove all air bubbles from the syringe to prevent, that they come into the system during the bleeding procedure. ***
-[* black] Loosen the bleeding nipple around 1/2 turns and install the also half filled bleeding syringe to the braking caliper. ***Please be careful also and watch out for air bubbles into the syringe.***
+[* black] Loosen the bleeding nipple around 1/2 turns and install the also half filled bleeding syringe with the hose to the braking caliper. ***Please be careful also and watch out for air bubbles into the syringe.***