Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Dominik Schnabelrauch -

Правка одобрена автор Dominik Schnabelrauch

До
После
Без изменений

Шаг Линий

[* black] Adjust the braking lever to a 45° angle and remove the bleeding screw.
-[* black] Fill up half the bleeding syringe with DOT 5.1 brake fluid.
- [* icon_note] Make sure there are no bubbles that can get into the system during the bleeding procedure.
+[* black] Fill up half the bleeding syringe with DOT 5.1 brake fluid. Hold the syringe upright, cover the tip with a shop towel, and gently depress the plunger to purge any air bubbles from the syringe.
+ [* icon_caution] Make sure there are no bubbles that can get into the system during the bleeding procedure.