Перейти к основному содержанию

Возврат к шагу #7

Редактировать с помощью Tobias Isakeit -

Правка одобрена автор Tobias Isakeit

До
После
Без изменений

Шаг Линий

-[* black] Tighten the bleeding nipple and remove the hose from the caliper.
-[* black] Pull the lever a few times and let it snap. Then push the piston of the syringe to make sure that the completely system is filled up. Finally remove the syringe from the braking lever.
-[* black] Install the bleeding screw back to the lever.
+[* black] When done, tighten the bleeding nipple and remove the hose from the caliper.
+[* black] Pull the lever a few times and let it snap.
+[* black] Then push the piston of the lever syringe to make sure that the system is filled completely.
+[* black] Remove the syringe from the braking lever and install the bleeding screw back to the lever.
[* black] Clean up the lever/caliper with disc brake-cleaner and re-install the brake pads