Перейти к основному содержанию

Изменения к шагу №3

Отредактированно Andrew Bookholt -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] OnceGrab the small bridgefront bezel near the top edge of material has cleared the RAM arms,iMac and lift it straight up off the rear case.
[* icon_caution] The
front bezel is still attached to the iMac by itstwo cables.
[* icon_note] If your front bezel does not immediately lift off the rear case, lift the
lower edge justof the front bezel for enough clearance to insert a spudger and push up the two metal arms locking the bezel to clear the rear case.
[* black] OnceGrab the small bridgefront bezel near the top edge of material has cleared the RAM arms,iMac and lift it straight up off the rear case.
[* icon_caution] The
front bezel is still attached to the iMac by itstwo cables.
[* icon_note] If your front bezel does not immediately lift off the rear case, lift the
lower edge justof the front bezel for enough clearance to insert a spudger and push up the two metal arms locking the bezel to clear the rear case.

Изображение 1

Старая версия

Новая версия

Изображение 2

Старая версия

Новая версия

Изображение 3

Старая версия

Новая версия