Перейти к основному содержанию

Изменения к шагу №3

Отредактированно Andrew Bookholt -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Grab the front bezel near the top edge of the iMac and lift it straight up off the rear case.
[* icon_caution] The front bezel is still attached to the iMac by two cables.
[* icon_note] If your front bezel does not immediately lift off the rear case, lift the lower edge of the front bezel for enough clearance to insert a spudger near the top corners of the bezel and push up the two metal arms locking the bezel to the rear case.
[* icon_note] If your front bezel does not immediately lift off the rear case, lift the lower edge of the front bezel for enough clearance to insert a spudger near the top corners of the bezel and push up the two metal arms locking the bezel to the rear case.