Перейти к основному содержанию

Изменения к шагу №3

Отредактированно Andrew Bookholt -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] GrabInsert a plastic card up into the front bezel nearcorner of the air vent slot at the top edge of the iMac and lift it straight up off the rear case.
[* icon_caution] Theblack] Push the card toward the top of the iMac to release the front bezel is still attached to the iMac by two cableslatch.
[* icon_note] If yourPull the front bezel does not immediately lift offaway from the rear case, liftcase.
[* black] Repeat this process for
the lower edgeother side of the front bezel for enough clearance to insert a spudger near the top corners of the bezel and push up the two metal arms locking the bezel to the rear casebezel.
[* black] GrabInsert a plastic card up into the front bezel nearcorner of the air vent slot at the top edge of the iMac and lift it straight up off the rear case.
[* icon_caution] Theblack] Push the card toward the top of the iMac to release the front bezel is still attached to the iMac by two cableslatch.
[* icon_note] If yourPull the front bezel does not immediately lift offaway from the rear case, liftcase.
[* black] Repeat this process for
the lower edgeother side of the front bezel for enough clearance to insert a spudger near the top corners of the bezel and push up the two metal arms locking the bezel to the rear casebezel.