Перейти к основному содержанию

Изменения к шагу №2

Отредактированно Andrew Bookholt -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* red] Remove the two 4.8 mm T6 Torx screws securing the LVDSdisplay data cable to the logic board.
[* black] Grab the LVDSdisplay data cable connector by its black tab and pull it straight up off the logic board.
[* red] Remove the two 4.8 mm T6 Torx screws securing the LVDSdisplay data cable to the logic board.
[* black] Grab the LVDSdisplay data cable connector by its black tab and pull it straight up off the logic board.