Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Sam Tooley -

На одобрении

До
После
Без изменений

Шаг Линий

-[* black] There are two clips attached to the upper and lower ends of the WiFi card
-[* black] CAUTION: For the following step, do not pull the clip after you have detached it. The clip is fragile and too much force may cause the clip to break.
+[* red] There are two clips attached to the upper and lower ends of the WiFi card
+[* icon_caution] CAUTION: For the following step, do not pull the clip after you have detached it. The clip is fragile and too much force may cause the clip to break.
[* black] Grab the end of one of the clips and pull away from the WiFi card. This should make the clip visibly detached from the WiFi card.
[* black] Do the same for the other clip.