Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Taylor Dixon -

Правка одобрена автор Taylor Dixon

До
После
Без изменений

Шаг Линий

-[* black] With the adhesive cut, slowly lift the display up and carefully flip the display over toward the bottom and rest it on its face, as shown.
+[* black] With the adhesive cut, slowly lift the display up from the top (the side with the speaker-grille cutout), carefully flip it over vertically toward the bottom of the device, and rest it on its face, as shown.
[* icon_caution] Do not attempt to completely remove the display yet, as it is still connected by a fragile ribbon cable. Be careful to not to strain the cable while positioning the display.

Изображение 1

Старая версия

Новая версия

Изображение 2

Старая версия

Новая версия

Изображение 3

Старая версия

Новая версия