Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Mr. Porter -

Правка одобрена автор Angel

Без изменений

Шаг Линий

[* black] With the adhesive cut, slowly lift the display up from the top (the side with the speaker-grille cutout), carefully flip it over vertically toward the bottom of the device, and rest it on its face, as shown.
+ [* icon_note] Don't forget there's sticky adhesive everywhere, so consider resting an [product|IF145-123-2|opening pick] between the screen and display, to avoid spreading the gunk!
[* icon_caution] Do not attempt to completely remove the display yet, as it is still connected by a fragile ribbon cable. Be careful to not to strain the cable while positioning the display.