Почините Свои Вещи Сообщество Магазин

Изменения в этом шаге

Отредактированно Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* black] Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.
[* black] Push the fingerprint sensor off of its adhesive from the outside of the glass.
[* black] If the sensor is stubborn, gently slide a halberd spudger under the plastic backing to loosen the adhesive before pushing.
- [* black] This will make the adhesive less likely to be reusable, so try pushing with your finger first.
+ [* icon_note] This will make the adhesive less likely to be reusable, so try pushing with your finger first.