Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Adam O'Camb -

Правка одобрена автор Adam O'Camb

До
После
Без изменений

Шаг Линий

[* black] Once the back panel is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can while avoiding the curved edge.
[* black [* icon_note] The suction cup will not make a good seal on the curved portion of the glass.
[* black [* icon_note] The suction cup will not make a good seal on the curved portion of the glass.
[* black] Lift on the suction cup, and insert a halberd spudger, or opening pick, under the rear glass.
[* black [* icon_note] Due to the curved glass, you will be pushing up, rather than inserting parallel to the plane of the phone.
[* black [* icon_note] Due to the curved glass, you will be pushing up, rather than inserting parallel to the plane of the phone.

Изображение 1

Нет предыдущего изображения

Добавлено

Изображение 2

Нет предыдущего изображения

Добавлено