Возврат к шагу #7
Отредактированно Adam O'Camb -
Правка одобрена автор Adam O'Camb
- До
- После
- Без изменений
Шаг Линий
| + | [* icon_note] The fingerprint sensor cable connects the phone to the rear glass near the main camera. The cable is very short and should disconnect as the rear glass is removed. |
|---|---|
| + | [* icon_caution] As you lift the glass, peek in to be sure the orange cable with a blue connector has disconnected. |
| + | [* black] Use the opening picks to slice through any remaining adhesive and open the phone slightly. |
| + | [* icon_caution] If the fingerprint sensor cable seems snagged or stays taught do not open the phone any further. Disconnect the connector with the point of a spudger before proceeding. |
| + | [* black] Remove the glass from the phone. |
Изображение 1
Нет предыдущего изображения
Добавлено
Изображение 2
Нет предыдущего изображения
Добавлено