Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #3

Редактировать с помощью pollytintop -

На одобрении

До
После
Без изменений

Шаг Линий

[* icon_caution] Turn laptop over and open the screen fully. Take care as the screen is still connected to the logic board via black cable on right hinge.
[* black] Use a spudger to release the silver and black plastic cover that forms the hinge covers. Start at one side nearest a hinge and work along the rear of the case, there are 5 tabs to release along the keyboard edge.
[* black] Disconnect LCD cable by lifting straight upwards using the black plastic tabs on the top of the LCD connector. You may need to use a spudger to loosen the connection (Don't loosen near the logicboard)