Возврат к шагу #2
Отредактированно Adam O'Camb -
Правка одобрена автор Adam O'Camb
- До
- После
- Без изменений
Шаг Линий
| + | [* black] In the following steps you will be cutting through the adhesive around the edge of the rear glass panel. |
|---|---|
| + | [* black] Areas of interest are as follows. |
| + | [* red] Areas of adhesive (in addition to the adhesive on the edge of the rear case). |
| + | [* orange] Avoid sticking the spudger blade in too far here, to avoid damaging the rear button ribbon cable and chip. |
Изображение 1
Нет предыдущего изображения
Добавлено