Возврат к шагу #1
Отредактированно Sam Goldheart -
Правка одобрена автор Sam Goldheart
- До
- После
- Без изменений
Шаг Линий
| [* black] Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass. | |
| [* black] Push the fingerprint sensor off of its adhesive from the outside of the glass. | |
| - | [* black] If the sensor is stubborn, gently slide a halberd spudger under the plastic backing to loosen the adhesive before pushing. |
| + | [* black] If the sensor is stubborn, gently slide a halberd spudger or opening pick under the plastic backing to loosen the adhesive before pushing. |
| [* icon_note] This will make the adhesive less likely to be reusable, so try pushing with your finger first. |