Возврат к шагу #1
Отредактированно Adam O'Camb -
Правка одобрена автор Adam O'Camb
- До
- После
- Без изменений
Шаг Линий
| - | [* black] Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass. |
|---|---|
| - | [* black] Push the fingerprint sensor off of its adhesive from the outside of the glass. |
| + | [* black] If you're installing a new rear glass panel, you'll also need to transfer the fingerprint sensor to your new rear glass panel as follows: |
| + | [* black] Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass. |
| + | [* black] Push the fingerprint sensor off of its adhesive from the outside of the glass. |
| [* black] If the sensor is stubborn, gently slide a halberd spudger or opening pick under the plastic backing to loosen the adhesive before pushing. | |
| [* icon_note] This will make the adhesive less likely to be reusable, so try pushing with your finger first. |