Возврат к шагу #2
Отредактированно Sam Goldheart -
Правка одобрена автор Sam Goldheart
- До
- После
- Без изменений
Шаг Линий
| [* black] If the fingerprint sensor adhesive is intact, it may be reused, but if damaged at all you should remove the old adhesive and apply replacements. | |
| [* black] After removing the old adhesive, clean the edges of the fingerprint sensor with high concentration isopropyl alcohol (at least 90%), then apply the new adhesive. | |
| + | [* icon_reminder] You may also need to transfer the camera bezel to your new part, if that's the case, follow our [guide|122484|camera bezel removal guide|stepid=236006]. |