Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #8

Редактировать с помощью Eric Ivy -

Правка одобрена автор Eric Ivy

До
После
Без изменений

Шаг Линий

[* black] Start to turn the tuning peg counter clockwise, and keep the half inch piece of string on top of the string which is being woundwound around the tuner. This will stop the string from jumping over the tuner and make for a tighter string. Make sure that the string is onlaying over the top of the tuner as seen in the picture.
[* black] Also, as the string gets tighter, watch to make sure that the string is still resting in both of the bridge notchesnotches (steps 5 & 6).
[* black] Start to turn the tuning peg counter clockwise, and keep the half inch piece of string on top of the string which is being woundwound around the tuner. This will stop the string from jumping over the tuner and make for a tighter string. Make sure that the string is onlaying over the top of the tuner as seen in the picture.
[* black] Also, as the string gets tighter, watch to make sure that the string is still resting in both of the bridge notchesnotches (steps 5 & 6).