Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #8

Редактировать с помощью Ani Svadjian -

Правка одобрена автор Arthur Shi

До
После
Без изменений

Шаг Линий

[* black] Start to turn the tuning peg counter clockwise, and keep the half inch piece of string on top of the string which is being wound around the tuner. This
[* icon_note] The above step
will stop the string from jumping over the tuner and make for a tighter string.
[* icon_caution]
Make sure that the string is laying over theon top of the tuner as seen in the picturepicture to the right.
[* black] Also, as the string gets tighter, watch to makeicon_caution] Make sure that the string is still resting in both of the bridge notches (steps 5 & 6)6) as you tighten it.
[* black] Start to turn the tuning peg counter clockwise, and keep the half inch piece of string on top of the string which is being wound around the tuner. This
[* icon_note] The above step
will stop the string from jumping over the tuner and make for a tighter string.
[* icon_caution]
Make sure that the string is laying over theon top of the tuner as seen in the picturepicture to the right.
[* black] Also, as the string gets tighter, watch to makeicon_caution] Make sure that the string is still resting in both of the bridge notches (steps 5 & 6)6) as you tighten it.