Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #8

Редактировать с помощью Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений

Шаг Линий

[* black] Start to turn the tuning peg counter clockwise, and keep the half inch piece of string on top of the string which is being wound around the tuner.
[* [* icon_note] The above stepThis will stop the string from jumping over the tuner and make for a tighter string.
[* icon_cautionicon_note] Make sure that the string is laying on top of the tuner as seen in the picture to the rightpicture.
[* icon_cautionicon_note] Make sure that the string is still resting in both of the bridge notches (steps 5 & 6) as you tighten it.
[* [* icon_note] The above stepThis will stop the string from jumping over the tuner and make for a tighter string.
[* icon_cautionicon_note] Make sure that the string is laying on top of the tuner as seen in the picture to the rightpicture.
[* icon_cautionicon_note] Make sure that the string is still resting in both of the bridge notches (steps 5 & 6) as you tighten it.