Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #8

Редактировать с помощью Caleb -

Правка одобрена автор Caleb

До
После
Без изменений

Шаг Линий

[* black] Start to turn the tuning peg counter clockwise, keeping the half inch piece of string on top of the string which is being wound around the tuning peg.
[* icon_note] This will stop the string from jumping over the tuner and make fortuner, making a tighter string.
[* icon_note] This will stop the string from jumping over the tuner and make fortuner, making a tighter string.
[* icon_note] Make sure that the string is laying on top of the tuner as seen in the picture.
[* icon_note] Make sure that the string is still resting in both of the bridge notches (steps 5 & 6) as you tighten it.