Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Adam O'Camb -

Правка одобрена автор Adam O'Camb

До
После
Без изменений

Шаг Линий

[* icon_noteicon_reminder] If you're reusing the rear glass panel, skip this step and leave the fingerprint sensor on the panel. If you're replacing a damaged rear glass panel, you will have to transfer the fingerprint sensor to your new rear glass panel as follows:
[* icon_noteicon_reminder] If you're reusing the rear glass panel, skip this step and leave the fingerprint sensor on the panel. If you're replacing a damaged rear glass panel, you will have to transfer the fingerprint sensor to your new rear glass panel as follows:
[* black] Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.
[* black] Push the fingerprint sensor off of its adhesive from the outside of the glass.
[* icon_note] If you have trouble pushing the fingerprint sensor out, slide a Halberd spudger along the edge of the sensor to cut some of the adhesive. This will make the adhesive less likely to be reusable, however.