Перейти к основному содержанию

Возврат к шагу #2

Отредактированно Andrew Bookholt -

На одобрении

До
После
Без изменений

Шаг Линий

[* icon_caution] Pressing the top of the hard drive bracket down to release it from the rear case requires a substantial amount of force, so we recommend laying your iMac stand-side down on a table to avoid knocking it over.
[* black] Press the hard drive bracket down toward the bottom edge of your iMac to free it from the rear case, then rotate the top of the drive toward yourself.
[* black] Lift the hard drive off its lower pins and pull it out of the rear case, minding the cables that are still attached.
+[* icon_reminder] When reinstalling the hard drive, be careful not to push the rubber grommets through the chassis with the hard drive pins as retrieving them may require logic board removal.