Перейти к основному содержанию

Возврат к шагу #8

Редактировать с помощью Scott Havard -

Правка одобрена автор Scott Havard

До
После
Без изменений

Шаг Линий

[* black] Lay a warm iOpener along the upper left corner of the iPad, spanning from the opening pick to the front-facing camera.
[* black] After letting the adhesive soften, insert the blade of your halberd spudger into the iPad above the opening pick.
-[* black] Cut the adhesive along the upper left side of the iPad using the halberd spudger. This may require reheating the edge of the iPad.
+[* black] Cut the adhesive along the upper left side of the iPad towards the front-facing camera using the halberd spudger. This may require reheating the edge of the iPad.