Перейти к основному содержанию

Возврат к шагу #8

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

-[* black] Lay a warm iOpener along the upper left corner of the iPad, spanning from the opening pick to the front-facing camera.
+[* black] Lay a hot iOpener along the upper left corner of the iPad, spanning from the opening pick to the front-facing camera.
[* black] After letting the adhesive soften, insert the blade of your halberd spudger into the iPad above the opening pick.
[* black] Cut the adhesive along the upper left side of the iPad towards the front-facing camera using the halberd spudger. This may require reheating the edge of the iPad.