Перейти к основному содержанию

Возврат к шагу #21

Редактировать с помощью Evan Noronha -

Правка одобрена автор Evan Noronha

Без изменений

Шаг Линий

[* black] Reinsert the blade of the halberd spudger as deep as it will go.
[* black] Continue sliding the blade along the edge until you reach the first opening pick you inserted.
-[* black] At this point, the display assembly should be fully separated from the rear case, but the adhesive along the top and bottom edges is thicker than the left and right edges. Examine the top and bottom and use the halberd spudger or a opening pick to cut away any adhesive connecting the display to the rear case.