Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #2

Редактировать с помощью Padraic Hoselton -

Правка одобрена автор Jeff Suovanen

Удален
Добавлено
Без изменений

Шаг Линий

[* blackred] Now remove these 3 T9 Torx screws from the graphics card bezel seen in the left imagebezel.
[* blackred] Now remove these 3 T9 Torx screws from the graphics card bezel seen in the left imagebezel.
[* black] Locate the large heatsink from the graphics card, which should be right above your DvD drive
[* blackorange] Remove the single screw there holding it in place
[* blackyellow] Carefully remove the graphics card temperature sensor cable from underneath the motherboard
[* blackicon_reminder] Remember the position as you need to plugin the new one here as well
[* blackorange] Remove the single screw there holding it in place
[* blackyellow] Carefully remove the graphics card temperature sensor cable from underneath the motherboard
[* blackicon_reminder] Remember the position as you need to plugin the new one here as well