Skip to main content

Changes to Step #7

Edit by Charlie McMahon

Правка одобрена by Taylor Dixon

Deleted
Added
Unchanged

Step Lines

[* black] Apply the metal bezel to the new 6 series graphisgraphics card. Make sure its aligned properly
[* black] Apply the metal bezel to the new 6 series graphisgraphics card. Make sure its aligned properly
[* black] Now insert the 6 series graphics card carefully.
[* black] Make sure you don't damage the upper side of the mother board when reinserting
[* black] When in place fix it by the 3 screws
[* black] Reinsert the temperatur sensor cable. You need fine hands or a good tool to do so. Be patient with this step