История PowerBook G4 Titanium DVI Logic Board Replacement Шага #2

Возврат к шагу #2

Отредактированно CaptFrost - 25 фев 2013 г.

Правка одобрена автор Andrew Optimus Goldheart

	[* black] Disconnect the 5 indicated connectors from the logic board, removing tape as necessary.
+	[* black] *Reassembly Tip:* Reseating the logic board will be much easier if you use kapton tape to hold these five connectors out of the way until it is in place.
+	[* black] *Caution:* If taping the connectors back, be careful not to use tape with anything but very weak adhesive (i.e. kapton tape). Even electrical tape can pull the paint off the hinges when removed.