Изменения в этом шаге
Отредактированно Adam O'Camb -
Правка одобрена автор Adam O'Camb
- До
- После
- Без изменений
Шаг Линий
[* icon_note] The two remaining strips (4L and 4R) do not have guide holes and are more difficult to place than the previous ones. Before sticking them down, we recommend first setting them in their respective places on the iMac to get comfortable with their placement. | |
[* black] Grasp the red film pull tab on the 4R adhesive strip and pull to remove the backing from the strip. | |
[* black] Align the strip on the bottom edge of the rear enclosure, directly to the right of the middle screw on that edge. | |
[* black] Run your finger along the length of the adhesive strip to ensure it is straight and unwrinkled, pressing down as you go to adhere the strip to the iMac. | |
- | [* icon_ |
+ | [* icon_note] On 2017 models, the microphone is located behind the bottom-right edge of the display. Applying adhesive strip 4R as shown here will muffle the microphone. [guide|96382|This guide|new_window=true] shows where to cut the adhesive strip to accommodate the new microphone position. |