Перейти к основному содержанию

Возврат к шагу #11

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] Carefully turn the MacBook over, so that the lower case lays flat.
-[* black] Raise the upper case/display assembly to about a 90-100° angle, or use something to prop it up so you don't have to hold it.
-[* icon_note] It's possible to open the MacBook all the way and lay both sides down flat, but this may put undue strain on the remaining connecting cables.
+[* black] Raise the upper case/display assembly to about a 90° angle, and prop it up against something sturdy so you don't have to hold it.
+ [* black] Add a piece of tape near the track pad to secure the upper case and prevent accidental movement.
+[* icon_caution] It's possible to open the MacBook all the way and lay both sides down flat, but this may damage the flex cables and is not recommended.

Изображение 2

Нет предыдущего изображения

Добавлено