Перейти к основному содержанию

Возврат к шагу #11

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

-[* black] Carefully turn the MacBook over, so that the lower case lays flat.
-[* black] Raise the upper case/display assembly to about a 90° angle, and prop it up against something sturdy so you don't have to hold it.
+[* black] Carefully close the MacBook and flip it over once again, so that the Apple logo faces up.
+[* black] Lifting from the front edge, raise the upper case/display assembly to about a 90° angle, and prop it up against something sturdy so you don't have to hold it.
[* black] Add a piece of tape near the track pad to secure the upper case and prevent accidental movement.
[* icon_caution] It's possible to open the MacBook all the way and lay both sides down flat, but this may damage the flex cables and is not recommended.

Изображение 1

Старая версия

Новая версия

Изображение 2

Старая версия

Новая версия

Изображение 3

Нет предыдущего изображения

Добавлено