Перейти к основному содержанию

Возврат к шагу #5

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] Disconnect the display cable by gently pulling it straight out of its connector.
[* icon_caution] Immediately close the retaining flap.
[* icon_reminder] The flap must remain '''closed''' when the cable is reinserted during reassembly. Carefully lineLine up the cable with the gold contacts facing down, and gently slide it into the '''closed''' connector. Take care not to crimp or damage the cable. When fully inserted, the indentations on the sides should not be visible.
[* icon_reminder] The flap must remain '''closed''' when the cable is reinserted during reassembly. Carefully lineLine up the cable with the gold contacts facing down, and gently slide it into the '''closed''' connector. Take care not to crimp or damage the cable. When fully inserted, the indentations on the sides should not be visible.