Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #2

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.
[* icon_noteicon_caution] Be sure to push parallel to the board, pushing first on one side, then the otherother, to slowly "walk" the connector out of its socket. Do not pry up, or you will damage the socket.
[* black] Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.
[* icon_noteicon_caution] Be sure to push parallel to the board, pushing first on one side, then the otherother, to slowly "walk" the connector out of its socket. Do not pry up, or you will damage the socket.