Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #2

Редактировать с помощью Jody Foo -

Правка отклонена автор Evan Noronha

До
После
Без изменений

Шаг Линий

[* black] Use the tip of a spudger to push the camera cable connector out of its socket on the logic board.
[* icon_note] Be sure to push parallel to the board, pushing first on one side, then the other to "walk" the connector out of its socket.
[* icon_note] If you are only going to replace or remove the right fan, removing the camera cable is not necessary. In [guide|27690|step 8|stepid=36674], just lift and free the cables from the adhesive that sticks them to the fan.