Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Jake Devincenzi -

На одобрении

До
После
Без изменений

Шаг Линий

-[* black] Use the pointy end of a spudger to flip up the left fan ZIF connector on the logic board.
+[* black] Use the pointed end of a spudger to flip up the left fan ZIF connector on the logic board.
[* black] Starting at the top of the cable, slide a plastic opening tool under the left fan cable to free it from the logic board.
[* icon_caution] Use caution when freeing the cable, as it is strongly adhered to the logic board.
[* black] Lift the left fan out of the device.