Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью mayer -

Правка одобрена автор mayer

До
После
Без изменений

Шаг Линий

-[* black] Using the flat end of a spudger, pry the I/O Board connector straight up out of its socket on the logic board.
+[* black] Using the flat end of a spudger, pry the I/O Board connector straight up out of its socket on the logic board. On reassembly, connect this end first as it does not flex.
[* black] In a similar fashion, remove the I/O Board connector from its socket on the I/O Board.
[* black] Remove the I/O Board cable from the MacBook Pro.