Возврат к шагу #1
Редактировать с помощью Jake Devincenzi -
- До
- После
- Без изменений
Шаг Линий
| [* red] Remove the single 2.6 mm T5 Torx screw holding the left rubber hinge cover in place. [* black] [* icon_note] The screw in the right hinge cover should already have been removed. [* black] Slide the right cover out of its bezel, then lift it out of the device. |
| [* red] Remove the single 2.6 mm T5 Torx screw holding the left rubber hinge cover in place. [* black] [* icon_note] The screw in the right hinge cover should already have been removed. [* black] Slide the right cover out of its bezel, then lift it out of the device. |
Изображение 1
Старая версия
Новая версия