Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #2

Редактировать с помощью Walter Galan -

Правка одобрена автор Walter Galan

До
После
Без изменений

Шаг Линий

[* black] Carefully slideInsert the edge of a plastic opening tool underunderneath the thick partupper microphone.
[* black] Slide the blade
of a plastic opening tool along the bottom of the upper microphone, releasing the microphone cableadhesive.
[* black] Carefully slideInsert the edge of a plastic opening tool underunderneath the thick partupper microphone.
[* black] Slide the blade
of a plastic opening tool along the bottom of the upper microphone, releasing the microphone cableadhesive.
[* icon_caution] Be careful when releasing the adhesive holding the cable down, as these cables have been known to tear easily.
[* black] SlideIn a similar manner, release the plastic opening tool along the length of the cable until you release all ofadhesive underneath the adhesivelower microphone.
[* black] SlideIn a similar manner, release the plastic opening tool along the length of the cable until you release all ofadhesive underneath the adhesivelower microphone.
[* black] Lift the cable out of the device.